|
Next
|
Bolt-on Installation of Flotation Pods / 07 |
Photo by J. Phil Arnold E-Mail: PhotoArt@jphilarnold.com Web Site: www.jphilarnold.com |
|
|
Next
|
Bolt-on Installation of Flotation Pods / 07 |
Photo by J. Phil Arnold E-Mail: PhotoArt@jphilarnold.com Web Site: www.jphilarnold.com |
Ready for Final Assembly
Getting a good watertight seal around all the holes is critical to a successful installation. I used a marine grade of adhesive/sealant to insure a watertight installation. I had installed each of pod with all it's hardware to test the fit and alignment prior to starting the final installation with the adhesive/sealant. As a final step of preparation, I laid all the hardware out with each pod to insure each piece was readily available once I started applying the sealant.
Use the scrollbar at the left of this window to view all the thumbnails in this section.